NextClear Matt - 2K Spray High Solid Clear Coat ml 400 Clear Extra Matt

Return to Professional 2K Bodywork Clear Coats

Product Description

NextClear is the 2K High Solid Lacquer made directly by VerniciSpray. This 2K High Solid Matt Lacquer guarantes high degree of opacity (gloss grade: 9-12) good resistance to scratch, it is perfect for bumper of cars and motorcycles, but not only for car touch up. You can use NextClear Extra Matt in any case you need to apply a clear coat with a good degree of opacity, UV protection, resistance to scratch and ageing, petrol, chemical substances and yellowing.
INSTRUCTIONS FOR USE: NextClear is a 2K spray that must be activated only at the moment of use. Lacquer and catalyst are already contained into the spraycan, to activate the catalysis remove the red plastic button from the cap of the spraycan and turn the can upside down. Press hard the red button in the stem on the bottom of the aerosol and shake very well for some minutes to make the catalyst dissolve completely. Before applying, sand lightly the surface to allow the anchor, or, in case of application on a freshly painted surface, apply the 2k clear coat when you see the paint is dry (when the surface is not more wet): you should wait usually 15-20 min from the application of our car custom paints (when you note that the painted surface is no longer moist to the view). Apply 2 coats: it is essential to apply the matt coating in thin layers, otherwise, if the product accumulates, the surface will tend to become more polished. Try to get a homogeneous application, if you want a homogeneous final matt effect with the same level of gloss. The matt clear coat reaches its complete drying after 48 hours (for more technical details see below). Use the contents of aerosol within 24 hours from the activation (the duration can be even longer, depending on the place where it is conserved).
Coverage of one aerosol: about 1,5 sqm.
The NextClear Lacquers are marked with the QUALITY EXTRA brand, tto identify all products directly made and tested by VerniciSpray for the best quality.
TO REMOVE USE ACETONE AND/OR NITRO THINNER (before the complete drying).

Technical Details

ml: 400

Technical Details and Useful suggests: Drying time (at 20°C and 60% RH):
flash time 15 min, dry dust free 20 min, dry to the touch 60 min, dry in depth 48 hours.
Pot Life: 24 hours from the activation (the duration can be even longer, depending on the place in which it retains).
You will find the detailed instructions for the activation and use of this Two-Component Lacquer on its package.
Fields of Application:
- mat finish for car bumpers and other matt parts of car bodywork
- rims (wheels) - clear coat on paint of Motorcycle (frames and tanks)
- Modelling, even dinamic

Related Products