Matt 2K Lacquer in pot with Spray Painting System
- Product code: Kit-2-2k-100OP
- EAN: 8052131637848
- Pack: Glass pot with catalyst and Spray Gun
- Category: Professional 2K Bodywork Clear Coats
Professional 2K Bodywork Clear Coats
2k Matt Lacquer with Spray Gun with Spray Gun is a complete kit to protect your car or motorbike paint with a layer of 2K polyurethane lacquer. The package contains one 100 ml pot 2K lacquer (100 ml are equal to one 400 ml spray can), one pot of its catalyst and one SPRAY GUN. This high gloss lacquer is ideal to protect any paints in a professional way, particularly bodywork paints: it is a polyurethane lacquer, very resistant to alcohol, petrol and partially to solvents too. The kit includes even a small measuring glass and two separated containers (2k lacquer and catalyst) because it is a two- component lacquer: they must be combined at the moment of use.
PREPARATION AND USE: prepare the mixture combining 2 parts of lacquer and 1 part of catalyst (ratio 2:1). Every time prepare only the quantity that you need, because the mixture lenght after the preparation (the combination of lacquer and catalyst) is about 2 hours (at 20°C). To use it with gun or with our Spray Gun: dilute the mixture with polyurethane thinner, like our POLI60 (for further information about the quantities look at the Technical Details below). Do a spray test. Spray at about 20-25 cm distance. Apply a coat of paint spraying both in horizontal and vertical direction. If necessary, you can repeat the operation after 5-15 minutes (always when the paint is not completely dry).
The coverage of 100 ml of clear coat with thinner is about 1.5-2.50 mq.
NOTE: For further information about our Spray Gun - the professional portable sprayer. It works as an usual painting gun: you can use it several times after you have cleaned it with nitro solvent. With one propellant sprayer you can spread up to 500 ml of paint.
REMOVE WITH ACETONE AND/OR NITRO THINNER (before the paint drying).
Technical Details and Useful suggests: To dilute the mixture Lacquer- Catalyst with Polyurethane Thinner:
100 ml LACQUER + 30 ml CATALYST + 50-70 ml THINNER.
- dry dust free (at 20°C and 60% RH) 15-20 min
- dry to the touch (at 20°C and 60% RH) 30-60 min
- dry in depth (at 20°C and 60% RH) 48 hours.
Matt nitro paint in all the RAL colours in cans with the best resistance and coverage. Always available20.13 €VAT included
Bodywork Touch up Paint in pot 100 ml. Custom Pastel colours to use with our Spray Gun, air gun or brush.12.44 €VAT included
Polyurethane solvent specifically formulated for dilution of 2K lacquers, for polyurethane paints and paints in metallic colours3.66 €VAT included
Glass Pot 170 ml for paints storage: it can be used with Spray Gun5.49 €VAT included
What writes who has bought this product
quasi perfettoProducts purchased
venditore serio... Il prodotto lo trovo ingenioso...
venditore serio e preciso!! Il prodotto lo trovo ingenioso. funziona discretamente per piccoli lavorettiProducts purchased
très content du service commercialProducts purchased
Il prodotto ...
Il prodotto che ho scelto ha soddisfatto pienamente le mie aspettative.Products purchased
Tutto bene, personale gentilissimo è servizio post vendita davvero impeccabile.... unico neo (davvero fastidioso) sono i costi delle spese di spedizione. Per la Sardegna davvero esagerati per non parlare poi per le isole minori.Products purchased