Copper Effect Satin Matt Polyurethane Paint, 2k paint in can 250 gr

Available in different formats Copper Effect Satin

Return to 2K Polyurethane Spray Paints in RAL colours

Product Description

NextRal 2K polyurethane paint, matt finish. Color Copper Effect Satin.

The package includes:

• 250 g can of polyurethane paint in the selected color
• Required hardener
• Graduated plastic mixing cup

The main features of this type of paint are:

• Excellent scratch resistance
• High durability without yellowing over time.
• UV resistance
• Resistance to chemicals and gasoline.

The 2K polyurethane paint must be mixed with the hardener immediately before use. Mix only the amount of product you intend to use: once activated, the paint should be used within approximately 2 hours (at 20°C).

The NextRal 2K paint range is available both in cans and in spray cans. Both formats are also available with a gloss finish.
When applying matt paints, it is essential to apply thin coats, as excessive paint build-up will result in a glossier finish.

Mixing ratio:

100 ml of paint + 33 ml of hardener
For spray application: dilute by 20-30% with polyurethane thinner (not included).

Application:

• By brush: add the required hardener to the paint and mix thoroughly until a homogeneous, ready-to-use product is obtained.
• By spray: for spray gun applications, mix the paint with the hardener and then dilute the mixture with polyurethane thinner (not included). Dilution should be between 20% and 30%; increase gradually if necessary.
• By roller: mix the paint and hardener as for brush application, then gradually dilute until the desired viscosity is achieved (use rollers suitable for solvent-based paints).

Warning: the more the paint is diluted, the lower its covering power will be. As a result, additional coats may be required to achieve full coverage with the selected color.

Coverage: 10-12 m²/kg
Removal: with acetone and/or nitro thinner before complete curing.
Drying times (20°C, 60% RH): dust-free 10 min, touch dry 25 min, fully dry 16-24 hours.

Technical Details

pc: 1

Technical Details and Useful suggests:

Applying a protective clear coat is not necessary. However, if you wish to provide additional protection to the freshly painted surface, we recommend using a 2K two-component clear coat.

The clear coat can be applied 1-2 hours after applying the selected paint or after it has fully cured (1-2 days later). Lightly sanding the surface to restore a matt finish before applying the chosen clear coat.

Other Colours

Related Products