NextRal
2K polyurethane paint, gloss finish. Color Ral 7035 light grey.
The package includes:
- 250 g can of polyurethane paint in the selected color
- Required hardener
- Graduated plastic mixing cup
The main features of this type of paint are:
- Excellent scratch resistance
- High gloss finish that does not tend to yellow over time.
- UV resistance.
- Resistance to chemicals and gasoline.
The 2K polyurethane paint must be mixed with the hardener immediately before use. Mix only the amount of product you intend to use: once activated, the paint should be used within approximately 2 hours (at 20°C).
The NextRal 2K paint range is available both in cans and in spray cans. Both formats are also available with a matt finish.
Mixing ratio:
100 ml of paint + 50 ml of hardener
For spray application: dilute by 10?20% with polyurethane thinner (not included).
Application:
- By brush: add the required hardener to the paint and mix thoroughly until a homogeneous, ready-to-use product is obtained.
- By spray: for spray gun applications, mix the paint with the hardener and then dilute the mixture with polyurethane thinner (not included). Dilution should be between 10% and 20%; increase gradually if necessary.
- By roller: mix the paint and hardener as for brush application, then gradually dilute until the desired viscosity is achieved (use rollers suitable for solvent-based paints).
Warning: the more the paint is diluted, the lower its covering power will be. As a result, additional coats may be required to achieve full coverage with the selected color.
Coverage: 8 m²/kg
Removal: with acetone and/or nitro thinner before complete curing.
Drying times (20°C, 60% RH): dust-free 15 min, touch dry 60 min, fully dry 12?16 hours.
Specific technical notes and warnings
Applying a protective clear coat is not necessary. However, if you wish to provide additional protection to the freshly painted surface, we recommend using a 2K two-component clear coat.
The clear coat can be applied 1-2 hours after applying the selected paint or after it has fully cured (1-2 days later). Lightly sanding the surface to restore a matt finish before applying the chosen clear coat.
