NextAcril is the acrylic paint produced by VerniciSpray. It is a
high-quality matt acrylic paint with a high anchoring power on many types of surfaces, especially it has an
excellent adhesion on plastic which is usually a difficult substrate and needs to be treated with anchoring primer before painting. With NextAcril we have tested a very
good adhesion on PVC, polypropylene, ABS, plexiglass, even without any primer. It has quick drying, especially in the "dust free" phase, which is fundamental for a uniform finish, very good esthetically. It is produced in all matt RAL colors, which are often difficult to find on the market in matt finish, while they are always available by us because NextAcril is one of the VerniciSpray productions, which are all produced at the moment of order. With its completely acrylic composition, is has a high resistance to light and
does not yellowish or change color, it is more elastic than a nitro paint, for example, so it is more difficult to crack over time. At the same time, since it is a pure acrylic paint, it does not resist alcohol, gasoline, nor the action of abrasive products.
Instructions for Use: Clean and degrease the surfaces well before painting. Then sand or just make it matt with
scotch brite in case of surfaces already in good condition. Apply 2 or 3 coats of paint with interval of about 5 minutes.
Always be careful to apply in thin layers, otherwise if you accumulate too much product the finish could become glossy and not matt, it is an essential device when we use matt paints.
Coverage: one spray covers about 1 square metre (2 coats).
Specific technical notes and warnings
Drying time (at 20°C and 60% RH):- dry dust free 5 min
- dry to the touch 20 min
- dry in depth 3-4 hours
Application: 2/3 coats at about 5 min
Coverage: about 1 sqm with one spray
