NextRal 2k Polyurethane Spray Paint in Matt RAL colours Ral 6012 black green

The Spray Paints NextRal are the last goal in the spray paint evolution: the limit of 1k in the paints has been overcome, the new spray paints are 2k. Our 2k paints are polyurethane based and have better properties than the common paints: in fact the catalyzed polyurethane paints have a high UV rays, chimical and oil products resistance. Theyx guarantee bright colours with no yellowing and combine toughness and elasticity. The two-component polyurethane Paints have higher quality than the common 1k paints, so they are considered for professional use, but they are useful even for who need a very resistant paint in the field of automotive or for motorbikes or even to paint wood surfaces.
In the NextRAL Line, the 2k Paints in spray can are available in more than 200 RAL colours with gloss or matt finish: the finish of this item is matt.
INSTRUCTIONS FOR USE: How the 2k Paint must be activated
This is a two-component polyurethane paint so it must be activated with its catalyst (paint and catalyst are inside the spray can). To begin the catalyst process, remove the red plastic button from the cap of the spray can. Turn the spray can upside down and press hard the red button in the stem on the bottom of the can. Now shake the spray can very well to make the catalyst dissolve completely. The polyurethane paint is ready to be used now. It is important to stress the importance of application in thin layers: it is essential with matt coatings to apply them in thin layers , otherwise if the product accumulates, the surface will tend to become more polished.
REMEMBER: Before the application of the 2k paint, you must have a primer on the surface (it can be even the old paint), you can choose among our range of primers and fixative. The best one you can use is a 2k epoxy Primer, which anchors to every material (all the metals, wood and some plastic surfaces). We recommend to use this 2k epoxy primer if you need the best result.
Attention: This is a 2k paint to be activated at the moment of use, so it must be applied within a short time period from the activation (about 6-7 hours). For the drying time, look at the Technical Details below.

Possible application Fields: car bodywork, motorbike frame, wood surfaces and any other application that requires resistant and elastic paint.

2K PAINTS ARE 50 TIMES BETTER THAN THE 1K ONES!

Specific technical notes and warnings

Drying time (at 20°C and 60% RH):
- dry dust free 30 min
- dry to the touch 60 min
- dry in depth and complete crosslinking 48 hours