MITSUBISHI ENDEAVOR Car touch up paint pot : metallic and pearl colours - manufacturer colour ja1 deep grey met.
Car custom paint: metallic and pearl colours in pot ‐ MITSUBISHI ENDEAVOR ‐ ja1 deep grey met.
Glass pot
ja1 deep grey met.
- Product code: BVCD-MIT-JA1
- EAN: 8052131250450
- Pack: Glass pot
- Category: Car Spray Paint and pot for Automotive Touch Up
- Original Colour Code: JA1
- Finish: DEEP GREY MET.
- Car Make: MITSUBISHI
- Car Model: ENDEAVOR
- Years Interval: 2009-2011
- Compatible Car models: ECLIPSE, GALANT, SPYDER, ENDEAVOR
Available in different formats ja1 deep grey met.
-
Professional touch up paint kit spray
58.13 €VAT included -
Basic car touch up paint kit spray with perfect colour match
40.27 €VAT included
Product Description
If you are thinking about repairing small scratches on your car, VerniciSpray has the right solution for you.
VerniciSpray metallic car paints are well known and appreciated for their high performance qualities. They are available in different formats to meet a wide range of needs.
Here we offer the 100 ml jar for your MITSUBISHI ENDEAVOR, produced to the highest standards of precision thanks to our digital tinting machine.
When should you choose paint in a pot?
How do you know whether to choose a spray can, a paint jar, or a touch-up pen for your car's color?
It all depends on the type of repair you need to carry out. If the area to be painted is large, a spray can or loose paint applied with a spray gun is the best option. If, on the other hand, you need to touch up one or more small, localized areas, you can opt for brush-on paint or a touch-up stick.
The 100 ml format is the ideal solution for small bodywork touch-ups, which can be easily applied with a brush and without the need to mask the surrounding areas.
How to use:
If applying the paint with a brush
- Clean the surface thoroughly using a silicone remover.
- Stir the paint well before application.
- Apply 2-3 coats of paint, allowing the previous coat to dull and lose its ?wet look? before applying the next one.
- Once the paint is dry to the touch, apply the clear coat.
- After completing the job, wait a few days for both the paint and the clear coat to fully cure, then use a fine abrasive polishing compound to remove any step between the new and the original paint.
If applying the paint with a spray gun
- Clean the surface thoroughly using a silicone remover.
- Mix the paint well and dilute it appropriately.
- The dilution ratio depends on the type of spray gun used (nozzle size, pressure, etc.) and on the desired viscosity (thicker or thinner).
- We recommend following the our's dilution guidelines. If you wish to adjust the thinner ratio, do so gradually and always test the product before applying it.
- Apply 2-3 coats of paint, allowing each coat to dull and lose its wet appearance before applying the next one.
- Once the paint is dry to the touch, apply the clear coat.
Bodyshop tips
When applying paint with a brush, it is important to blend the new paint carefully with the surrounding original paint. Otherwise, you risk creating an unpleasant ridge between the old and new paint, as well as visible brush marks.
How can this be avoided?
Our advice is to apply very thin coats of paint, preferring one or two extra passes rather than a single heavy coat.
Applying too much product with only one coat can prevent the paint from leveling properly. Thin coats naturally take more time, as the paint must be applied in several stages and allowed to dry correctly between coats, but this ensures optimal leveling on the surface.
This results in a more uniform finish and helps prevent halos or streaks caused by the brush during drying.
Technical Details
ml: 100
Technical Details and Useful suggests: Paint dilution ratio with polyacrylic (or polyurethane) thinner: Important note All metallic car paints are two-coat systems, regardless of the chosen format. This means that metallic paint alone will not match the original finish unless a clear coat is applied over the color.
100 parts PAINT + 40-60 parts THINNER
After completing your brush touch-up with the selected paint, you can apply a 2K protective clear coat with a brush or use a spray clear coat.
What's important is that a protective clear coat is applied after the color coat.
Other Colours
Car Make: MITSUBISHI, Car Model: ENDEAVOR
Other metallic colours
Other solid colours
Related Products
-
Car painting accessories for brush touch-up
The VerniciSpray Kit for brush or marker retouching, is the best option when talking about small touch-up jobs on your car.
22.68 €VAT included -
2K clear coat high solid in pot - gloss or matt
Bodywork 2k lacquer in pot to spray or to be used with brush. gloss or matt. To protect any paints, especially for bodywork touch up
18.84 €VAT included -
Micro brushes for car touch up in 3 variants
12 disposable microbrushes to be used with our custom paint in pot: it is an assorted kit with medium, fine and super fine tip
4.56 €VAT included -
2k Gloss clear coat in pot with spray painting kit
Complete clear coat repair kit. The package contains one 100 ml pot high gloss high solid clear coat and one spray gun
32.58 €VAT included -
High quality brushes for car touch up in different sizes
Touch up paint brushes available in 4 sizes (single or complete set). Perfect for spot repair of fine scratches or chips on the body used with our car touch up paint in pot, fine bristles in vajo kazan hair
5.52 €VAT included -
Self Adhesive Polythene Masking Paper 0,18x20 m
Masking paper with with adhesive tape, size 18 cm x 20 meters. Ideal to mask parts of surfaces during painting works. Useful in car touch up and houseworks
4.44 €VAT included -
Antisilicone Cleaner
The necessary cleaner to prepare surfaces for painting: removes all the traces of silicone that are often on the bodywork
17.88 €VAT included -
NextBlend harmonizing for shades for auto retouching
Special spot blender formulated to get a homogenous paint transitions during repair paint jobs. Perfect for a good brilliance of little car spot repairs
11.76 €VAT included
