KIA RETONA touch up kit spray with perfect colour match - 1k spray clear coat and spray paint in manufacturer colour l2 turquoise blue met.
Basic automotive touch up kit spray ‐ KIA RETONA ‐ l2 turquoise blue met.
Product code: Kit1-VCD-KIA-L2 – EAN 8052131413541
- Pack: Spray cans 400 ml
- Number of pieces: 2 pcs.
- Category: Car Spray Paint and pot for Automotive Touch Up
- Finish: TURQUOISE BLUE MET. - L2
- Paint type: Metallic and pearlescent
- Colour code: L2
- Colour group: BLUE
- Vehicle: KIA RETONA
- Years: 2001
- Product codeVCD-KIA-L2
- Colour codeL2
- FinishTURQUOISE BLUE MET. - L2
- PackSpray can 400 ml
- Product codenextcolor-k300
- FinishStandard
- PackSpray can 400 ml
Alternative formats to Basic automotive touch up kit spray
-
Basic car touch up paint kit spray with perfect colour match
42.65 €
-
Professional touch up paint kit sprayRecommended
60.50 €
Information about Basic automotive touch up kit spray
Product description
- 1 spray can of paint in the original color code l2 turquoise blue met.for KIA RETONA
- 1 spray can of 1K gloss clear coat (single-component)
Both the 1K clear coat and the paint can be used and stored over time. They do not require activation.
Why choose the kit?
All metallic automotive paints are two-layer systems and require a protective clear coat on top to match the original finish.
If the clear coat is not applied, the paint will appear dull and will be more prone to damage.
In order to choose the most suitable clear coat, it is possible to consult a detailed guide on clear coats .
Choosing the kit is more cost-effective compared to purchasing the individual products that compose it.
When should you choose Kit1?
The basic car touch-up kit is recommended:
- When repairing relatively small areas (scratches, imperfections, or minor damage)
- When you want to use the selected products multiple times
- When you want a reliable product at an affordable price, avoiding costly body shop repainting
- When you want to reproduce your car/motorbike color with a glossy finish, as if it was brand new
Application:
- Clean the surface with a silicone remover spray. If necessary, fill the affected areas and sand them smooth and level.
- Apply the chosen paint in thin coats, respecting the correct drying times between coats.
- Apply the 1K gloss clear coat.
- After a few days, if necessary, apply a polish or a fine abrasive compound to remove any imperfections.
How to apply the 1K clear coat:
- The 1K clear coat does not require activation, so it can be used at any time.
- It is important to shake the can well before and during its use.
- Apply a first light tack layer. Then apply a second coat, ensuring the surface is properly wet. Finish with a third final coat.
- Between each coat, wait until the previously applied layer becomes matte.
- When it loses its wet look, it is ready for the next coat.
How to avoid common mistakes:
- Be careful! It is essential to properly wet the surface with the clear coat, especially when using a 1K clear coat.
- A common mistake is thinking that less clear coat is needed compared to paint. This is not the case.
- If it is not applied enough product, or if it is sprayed from too far away, the surface may not be properly wetted. As a result, the clear coat may turn dull instead of glossy.
Specific technical notes and warnings
If you purchase a metallic paint with a matte finish, the protective clear coat must still be applied to achieve the correct result.
It is therefore recommended to choose a 1K matte clear coat (not included in this kit).
Guide to choosing from the available formats for colour code L2
The same original L2 colour KIA, with different application methods. Choose according to the type of damage and your experience.
| Type of damage | Large areas, resprays and bodyshop-level work | Small areas, scratches and imperfections | Coverage up to about 1 sqm (2 coats) | Small confined areas, brush touch-ups |
|---|---|---|---|---|
| Application method | Spray: metallic paint plus catalyzed 2K clear | Spray: paint plus 1K clear, no activation needed | Spray in thin coats, 2-3 coats, wait between coats | Brush, 2-3 thin coats, no masking needed |
| Clear coat | Included: 2K two-pack clear, high durability and UV | Included: 1K single-pack clear, air-drying | Required, not included: pair with 1K or 2K | Required, not included: 2K by brush or spray |
| Difficulty | Advanced | Intermediate | Intermediate | Very easy |
| Finish type | High gloss, high hardness, maximum resistance | Glossy, reusable over time | Two-coat matte base, needs clear coat | Two-coat matte base, needs clear coat |
| Price including VAT | 60.50 € | 42.65 € | 32.71 € | 29.84 € |
KIA vehicles with colour code L2
The code L2 – TURQUOISE BLUE MET. - L2 was used on all the KIA models listed. Select your model to view the dedicated product page.
Other colours available for KIA RETONA
All original colours available for KIA RETONA are formulated to OEM specifications using the same manufacturing process. If you cannot find the colour code, see our colour code guide or our guide to finding the code by vehicle make.
Metallic and pearlescent
-
= COMBINAZIONE KIA 4R / KIA C3
JT
-
=COMBINAZIONE KIA 9B / KIA C7 (CARNIVAL)
WN
-
=COMBINAZIONE KIA W3 / KIA 1W (RETONA)
YW
-
=COMBINAZIONE KIA W3 / KIA 9B (RETONA)
YB
-
=COMBINAZIONE KIA W3 / KIA F2 (RETONA)
QB
-
=COMBINAZIONE KIA W3 / KIA R1 (RETONA)
MR
-
=COMBINAZIONE KIA W3 / KIA R2 (RETONA)
LY
-
=COMBINAZIONE KIA W3 / KIA S2
MG/2
-
=COMBINAZIONE KIA W3 / L2 (RETONA)
YE
-
FAIR BLUE MET.
F2
-
MIDNIGHT BLACK MET.
9B
-
QUARZ VIOLET MET.
R2
-
REO GOLD MET.
1W
-
RUBY RED MET.
R9
-
SOLDIER GREEN MET.
S2
-
TURQUOISE BLUE MET.
L2
-
WEIGHT SILVER MET.
W3
