Ho scoperto Vernicispray grazie a Fabio tuttofare su YouTube. Dopo aver verniciato ex novo un bauletto della vespa ho scoperto che con i prodotti giusti,acquistati da Vernicispray,si possono eseguire dei bei lavori.Naturalmente il personale che ho contattato mi ha seguito fino alla spedizione.Ho intenzione di fare alcuni lavoretti sul camper e sicuramente quanto prima,tempo permettendo farò un nuovo ordine.Lo consiglio.
MERCEDES CLS professional touch up kit spray with the best colour match for cars: 2K high gloss clear coat and metallic paint 189 Smaragd Schwarz Metallic (Bumper Color=204 - 122 / 96)
Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat ‐ MERCEDES CLS ‐ 189 Smaragd Schwarz Metallic (Bumper Color=204 - 122 / 96)
Product code: Kit2-VCD-DB-189 – EAN 8052131565073
- Pack: Spray cans 400 ml
- Net quantity: 400 ml
- Category: Car Spray Paint and pot for Automotive Touch Up
- Finish: SMARAGD SCHWARZ MET.(COL.P.URTI=204-122/96) - 189
- Paint type: Metallic and pearlescent
- Colour code: 189
- Colour group: BLACK
- Vehicle: MERCEDES CLS
- Years: 2006-2007
- GXT0-T0C2-8008-ERGC
- Product codeTR-2K-400-GLO
- FinishClear Gloss
- Pack2k spray can 400 ml
- Product codeVCD-DB-189
- Colour code189
- FinishSMARAGD SCHWARZ MET.(COL.P.URTI=204-122/96) - 189
- PackSpray can 400 ml
Alternative formats to Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat
-
Basic car touch up paint kit spray with perfect colour match
39.95 €
-
Professional touch up paint kit spray
57.80 €
Information about Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat
Product description
- 1 spray can of paint in the original color code 189 Smaragd Schwarz Metallic (Bumper Color=204 - 122 / 96)for MERCEDES CLS
- 1 spray can of 2K gloss clear coat (two-component)
The 2K clear coat spray must be activated at the time of use and used within 24-48 hours. It provides a high-gloss, high-solid finish.
The paint, on the other hand, can be stored and reused over time.
Why choose the kit?
All metallic automotive paints are two-layer systems and require a protective clear coat on top to match the original finish.
If the clear coat is not applied, the paint will appear dull and will be more prone to damage.
In order to choose the most suitable clear coat, it is possible to consult a detailed guide on clear coats .
Choosing the kit is more cost-effective compared to purchasing the individual products that compose it.
When should you choose Kit2?
The professional car touch-up kit is recommended:
- When repairing relatively large areas
- When you want to achieve a professional, body-shop-quality result
- When you want a highly glossy and very durable finish
Application:
- Clean the surface with a silicone remover spray. If necessary, fill the affected areas and sand them smooth and level.
- Apply the chosen paint in thin coats, respecting the correct drying times between coats.
- Apply the 1K gloss clear coat.
- After a few days, if necessary, apply a polish or a fine abrasive compound to remove any imperfections.
How to apply the 2K clear coat:
- The clear coat must be activated at the time of use; otherwise, after 24-48 hours the activated product will begin to cure inside the spray can.
- Apply a first light tack coat. Then apply a second coat, ensuring the surface is properly wetted. If necessary, apply a third light "dust coat."
- It is important to respect the correct application times for the 2K clear coat. You can proceed in two ways:
- Option 1: after applying the first coat, wait approximately 30-60 minutes before applying the next layer, and follow the same timing for any additional coats.
- Option 2: allow the first coat to fully cure (24 hours). After 24 hours, lightly sand the surface again, then apply the second coat.
- Be careful! If you use intermediate timing between these two options, you risk creating an undesirable orange peel effect.
- For example: if you apply the second coat 6 hours after the first, the first coat will be partially cured (between initial and full drying), while the second coat will begin surface drying.
In this case, as the second coat dries faster than the underlying layer, it will tend to "pull" the lower layer, creating small ripples visible to the naked eye.
Specific technical notes and warnings
If you purchase a metallic paint with a matte finish, the protective clear coat must still be applied to achieve the correct result.
It is therefore recommended to choose a 2K matte clear coat (not included in this kit).
Guide to choosing from the available formats for colour code 189
The same original 189 colour MERCEDES, with different application methods. Choose according to the type of damage and your experience.
MERCEDES vehicles with colour code 189
The code 189 – SMARAGD SCHWARZ MET.(COL.P.URTI=204-122/96) - 189 was used on all the MERCEDES models listed. Select your model to view the dedicated product page.
Other colours available for MERCEDES CLS
All original colours available for MERCEDES CLS are formulated to OEM specifications using the same manufacturing process. If you cannot find the colour code, see our colour code guide or our guide to finding the code by vehicle make.
Metallic and pearlescent
-
ANDRADITGRUEN MET.(P.URTI=6330)
6816
-
ANDRADITGRUEN MET.(P.URTI=6330)
816
-
CARNEOLROT MET.
3544
-
CARNEOLROT MET.
544
-
CAVANSITBLAU MET
890
-
CUBANITSILBER MET.
723
-
CUBANITSILBER MET.
9723
-
CUPRITBRAUN MET.
497
-
DESIGNO ALLANITGRAU MET.
044
-
DESIGNO GRAPHITGRUEN MET.
041
-
DESIGNO MAGNO KASCHMIRWEISS MET.
049
-
DESIGNO MAGNO PLATIN MET.
051
-
DESIGNO MOCCASCHWARZ MET.
033
-
DESIGNO MYSTICBLAU MET.
032
-
DESIGNO MYSTICWEISS MET.
048
-
DIAMANTWEISS MET.
799
-
FLINTGRAU MET.
368
-
FLINTGRAU MET.
7368
-
INDIUMGRAU MET.
963
-
INDIUMGRAU MET.
9963
-
IRIDIUMSILBER MET.
775
-
IRIDIUMSILBER MET.
9775
-
MAGNO MANGANITGRAU MET
795
-
OBSIDIANSCHWARZ MET.
197
-
OBSIDIANSCHWARZ MET. (COL.P.URTI=9178-7221)
197-9197
-
PALLADIUMSILBER MET.
792
-
PERIKLASGRUEN MET.
300
-
PERLBEIGE MET.
794
-
PERLITGRAU MET.
747
-
RUTILBRAUN MET.
492
-
SANIDINBEIGE MET.
1798
-
SANIDINBEIGE MET.
798
-
SMARAGD SCHWARZ MET.(COL.P.URTI=204-122/96)
189
-
SMARAGD SCHWARZ MET.(COL.P.URTI=204-122/96)
189-9189
-
TANSANITBLAU MET. (COL.P.URTI=5253)
359-5359
-
TANSANITBLAU MET. (COL.P.URTI=5253)
359
-
TENORITGRAU MET.
755
-
TENORITGRAU MET.
7755
-
THULITROT MET.
541
-
TRAVERTINBEIGE MET. (COL.P.URTI=1433-1454)
693
-
TRAVERTINBEIGE MET. (COL.P.URTI=1433-1454)
693-1693
Reviews from customers who purchased the product
2,429 global ratings
What customers who purchased this item say
Prodotti ottimi, assistenza capillare e presente, che dire 10 stelle per adesso, ma spero anche in futuro, dato che acquisterò da loro ogni volta che ne avrò bisogno, Bravi grazie di esistere
Vernice perfetta, gentilissimi nella comunicazione, tempi di consegna velocissimi, che altro dire , una Ditta di altro livello, veramente contento, grazie ancora.
Grazie al vostro prodotto conforme all'originale, con poca esperienza, ma con sapevolezza del risultato, ho potuto sottrarmi al costo esorbitante del carrozziere. Grazie. Se dovessi averne ancora bisogno ricorrerò all'acquisto dei vostri prodotti . Cordialità. Giuseppe Caia