Preview 42a graphite met.
42a graphite met. 42A
Questions about the product or colour?
Call VerniciSpray customer service – +39 0571 530262 or message us on WhatsApp

TOYOTA YARIS professional touch up kit spray with the best colour match for cars: 2K high gloss clear coat and metallic paint 42a graphite met.

Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat ‐ TOYOTA YARIS ‐ 42a graphite met.

Product code: Kit2-VCD-TOY-42A – EAN 8052131775830

Product format
Specifications and compatibility
  • Finish: GRAPHITE MET. - 42A
  • Paint type: Metallic and pearlescent
  • Colour code: 42A  
  • Colour group: GREY
  • Vehicle: TOYOTA YARIS
  • Years: 2017
Purchased 100+ in the past month
In stock
47.88 € without VAT
57.46 € VAT included
Offer valid until: 30-09-2026
 Add to cart
Not sure which product to choose? Call an expert or WhatsApp.

Alternative formats to Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat

Preview 42a graphite met.
42A · TOYOTA YARIS Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat
57.46 € VAT included

Information about Professional automotive touch up kit spray metallic paint and 2k high gloss clear coat

Product description

Car touch-up paint kit for refinishing, consisting of:
  • 1 spray can of paint in the original color code 42a graphite met.for TOYOTA YARIS
  • 1 spray can of 2K gloss clear coat (two-component)

The 2K clear coat spray must be activated at the time of use and used within 24-48 hours. It provides a high-gloss, high-solid finish.
The paint, on the other hand, can be stored and reused over time.

Why choose the kit?

All metallic automotive paints are two-layer systems and require a protective clear coat on top to match the original finish.

If the clear coat is not applied, the paint will appear dull and will be more prone to damage.
In order to choose the most suitable clear coat, it is possible to consult a detailed guide on clear coats .

Choosing the kit is more cost-effective compared to purchasing the individual products that compose it.

When should you choose Kit2?

The professional car touch-up kit is recommended:

  • When repairing relatively large areas
  • When you want to achieve a professional, body-shop-quality result
  • When you want a highly glossy and very durable finish

Application:

  1. Clean the surface with a silicone remover spray. If necessary, fill the affected areas and sand them smooth and level.
  2. Apply the chosen paint in thin coats, respecting the correct drying times between coats.
  3. Apply the 1K gloss clear coat.
  4. After a few days, if necessary, apply a polish or a fine abrasive compound to remove any imperfections.

How to apply the 2K clear coat:

  • The clear coat must be activated at the time of use; otherwise, after 24-48 hours the activated product will begin to cure inside the spray can.
  • Apply a first light tack coat. Then apply a second coat, ensuring the surface is properly wetted. If necessary, apply a third light "dust coat."
  • It is important to respect the correct application times for the 2K clear coat. You can proceed in two ways:
    • Option 1: after applying the first coat, wait approximately 30-60 minutes before applying the next layer, and follow the same timing for any additional coats.
    • Option 2: allow the first coat to fully cure (24 hours). After 24 hours, lightly sand the surface again, then apply the second coat.
  • Be careful! If you use intermediate timing between these two options, you risk creating an undesirable orange peel effect.
  • For example: if you apply the second coat 6 hours after the first, the first coat will be partially cured (between initial and full drying), while the second coat will begin surface drying.
    In this case, as the second coat dries faster than the underlying layer, it will tend to "pull" the lower layer, creating small ripples visible to the naked eye.

Specific technical notes and warnings

If you purchase a metallic paint with a matte finish, the protective clear coat must still be applied to achieve the correct result.
It is therefore recommended to choose a 2K matte clear coat (not included in this kit).

Guide to choosing from the available formats for colour code 42A

The same original 42A colour TOYOTA, with different application methods. Choose according to the type of damage and your experience.

Type of damage Large areas, resprays and bodyshop-level work Small areas, scratches and imperfections Coverage up to about 1 sqm (2 coats) Small confined areas, brush touch-ups
Application method Spray: metallic paint plus catalyzed 2K clear Spray: paint plus 1K clear, no activation needed Spray in thin coats, 2-3 coats, wait between coats Brush, 2-3 thin coats, no masking needed
Clear coat Included: 2K two-pack clear, high durability and UV Included: 1K single-pack clear, air-drying Required, not included: pair with 1K or 2K Required, not included: 2K by brush or spray
Difficulty Advanced Intermediate Intermediate Very easy
Finish type High gloss, high hardness, maximum resistance Glossy, reusable over time Two-coat matte base, needs clear coat Two-coat matte base, needs clear coat
Price including VAT 57.46 € 39.60 € 29.66 € 26.80 €

TOYOTA vehicles with colour code 42A

The code 42A – GRAPHITE MET. - 42A was used on all the TOYOTA models listed. Select your model to view the dedicated product page.

Other colours available for TOYOTA YARIS

All original colours available for TOYOTA YARIS are formulated to OEM specifications using the same manufacturing process. If you cannot find the colour code, see our colour code guide or our guide to finding the code by vehicle make.

Metallic and pearlescent

All colour codes for TOYOTA
Last updated: Jul 8, 2026. Product viewed 24,947,119 times.